Skip to main content

Easy Install Eurobatex Self-Seal

New for 2013: Easy Install Eurobatex Self-Seal Pipe Insulation


Eurobatex products are manufactured by Union Foam in Italy, who are one of Europe's oldest and most respected manufacturers of flexible elastomeric foam insulation. And the new Easy-Install Eurobatex Class 0 Self-Seal range offers the outstanding quality you would associate with a Union Foam manufactured product, with the ease of installation that the Self-Seal strips give you.

The product is fully split, with self-adhesive tape along both faces of the seams; you simply peel them back and close the joint - its as easy as that!

The major benefit this gives you is time; its much quicker to install, allowing you to achieve excellent results faster than ever before.

Eurobatex is dust and fibre free, HCFC free, and has an Ozone Depletion Potential (ODP) of 0 as well as a Global Warming Potential (GWP) of Zero. As with all nitrile rubbers Eurobatex Class 0 is inherently resistant to microbes, making it ideal for use in hospital applications or applications where a sterile environment is required. Eurobatex Class 0 has a temperature range of -45°C to +105°C, with its fine cell structure giving it a thermal conductivity of 0.033W/m.K @ 0°C.

It's good, stable thermal insulation performance also make the product an ideal choice for energy conservation applications on heating systems, minimizing heat loss on domestic, industrial and commercial central heating pipework.

Frost protection is another area where Eurobatex makes an excellent choice. When using the appropriate thickness to correspond to the size of pipe, Eurobatex will provide effective frost protection to give a minimum of 12 hours down to -6°C in accordance with water Byelaw 49.

Eurobatex Class 0 comes in a range of products broad enough to suit a vast range of applications; offering a flexible approach to Class 0 pipe insulation.

Eurobatex Self-Seal will be available from 1st February 2013.

Comments

Popular posts from this blog

The Beginners Guide to Pipe Insulation: Flexible Foams

Next up in the series we are doing on pipe insulation is "flexible foams"; a category that includes polyethylene and expanded nitrile rubber.


Polyethylene Pipe Insulation
Climaflex pipe insulation is the UK's leading brand for polyethylene pipe insulation. This is the grey foam that most people are familiar with, the kind you would traditionally find in garden centres for example. Polyethylene is the cheapest, widely available product in the market. People very often wrongly assume cheap means poor quality, this is not the case with a brand such as Climaflex. It has a thermal conductivity of 0.034 W/m.K at 0°C which is broadly equal to that of any other flexible foam, and it also has a much higher "μ factor" than other foams, making it more resistant to moisture ingress. These facotrs make it ideal for use around the home, being easy to work with and providing good insulation. 
The material can be purchased in 1m and 2m lengths, and is available in wall thicknesse…

The Beginners Guide To Pipe Insulation: Getting to grip with the basics

Our Beginners Guide series of blogs will look at the common areas of pipe insulation lagging that you will want to look at when choosing your product. This guide will be of most interest to the DIY installers, but some of our later guides will cover more complex products and areas of application.

One of the things we get asked about a lot is what the dimensions quoted for pipe insulation actually mean. You will always see three measurements quoted when describing pipe insulation; Wall Thickness, Bore Size and Length.

In the below diagram, A is the "Bore" and B is the "Wall".

Wall thickness is very simply how much insulation you have; so for example if you have 13mm Wall pipe insulation, then that means you have 13mm of insulation on either side of your pipe. This thickness is very often one of the most important part of your decision; too thin and you might not get the results you are looking for but too thick and it might not fit between your pipe and the wall.

If…

Frost protection for domestic pipes

With the cold weather approaching we thought it would be a good idea to touch on how best to protect your pipes from frost this winter.

When dealing with frost protection on pipes inside a building your aim with insulating them is to delay the onset of freezing for as long as possible; it is not possible to guarantee a pipe will not freeze by insulation alone. The better the insulation, and the thicker the insulation, the longer you will give yourself. Under normal circumstances you aim to give yourself about 8-10 hours protection against sub zero temperatures. With pipes inside a home this is usually long enough to be sure the pipes will not freeze.


Ice formation inside the pipes will lead to an increase in pressure. As the water tries to flow this pressure will increase, and eventually will lead to the pipes bursting. A burst pipe can cause a lot of problems, not least of which is a lot of damage to your property and a lot of expense incurred.

Water regulations state that all water …