Skip to main content

‘No more deaths and no more risk’

Brussels, February 25, 2015 — Urgent action is needed now to stop the tragedy of out-dated fire safety regulations that claims the lives of thousands every year.

That was the stark message issued today following a high-level meeting between Members of the European Parliament (MEPs), the European Fire Fighters Unions Alliance (EFFUA) and building industry experts, organised by Fire Safe Europe (FSEU).

Top of the agenda was a call to tackle deadly, out-dated and inconsistent building fire safety irregularities across Europe and the need for tough new fire testing standards for construction materials.

“We assume that we are safe in our homes, offices, schools and hospitals but are we?” said Birgitte Messerschmidt, Fire Safety expert and Chair of Fire Safe Europe’s Technical Task Force. “Europe is a deadly patchwork of inconsistent building fire regulations many of which are dangerously outdated.
In Germany the distance to a school fire exit is 10 metres compared to 60 metres in Italy.”1

Fire fighter and International Secretary of EFFUA Mikael Svanberg said:

“Today fires are more unpredictable and dangerous than ever before. In the past we could anticipate what to expect, but now buildings are more complicated and the materials used to construct them are not always fire safe.”

“Fire safety risks in buildings are a daily reality and recognising this is the first step in addressing the issue. It’s time to take effective action,” said Czech MEP and Host of the event, Olga Sehnalová.

Fire kills 4,000 people every year in Europe2 and nearly 200 people are hospitalised daily as a result of smoke inhalation or fire injuries3 according to a new White Paper published by Fire Safe Europe. And where do 90% of fires occur? In buildings,4 where we spend 90% of our time5

From the lively debate a general agreement emerged on the need for more and better facts and statistics on fire safety, as well as more funding for research on the issue. On top of that, stakeholders recognised the social discriminatory dimension of fire.

“EU institutions are turning a blind eye to fire safety and putting lives at risk,” added Juliette Albiac, Managing Director of Fire Safe Europe. “In the 1950s it would take around 25 minutes for a full blaze to take hold, but today a major fire can be out of control in less than 3 minutes. We need urgent action now.”

About Fire Safe Europe

Fire Safe Europe (FSEU) is a broad and unique cross-sectorial alliance of fire experts, fire fighters, European associations, and international companies, including construction manufacturers and material suppliers of insulation, cable, concrete, ceiling, and fire protection equipment.

FSEU’s mission is to improve fire safety in buildings for European citizens through the FireSafetyFirst campaign, large-scale fire tests and sharing of expertise. Fire Safe Europe’s call to action on fire safety in buildings can be found on:

Press Contact: Roberta Arbinolo | +32 487-124-467 |
1 Fire Safe Europe internal study, 2014
2 Bullettin of Fire Statistics, Geneva Association
3 Consumer fire safety: European statistics and potential fire safety measures,
Netherlands Institute for safety NIBRA, January 2009, Versie: 431N8032/3.0, pp. 10
4 S. V. Sokolov, P. Wagner, J. R. Hall, Report No 10 of Centre of Fire Statistics of CTIF, World Fire Statistics, 2006
5 Indoor air pollution: new EU research reveals higher risks than previously thought, European Commission Press Realease Database, IP/03/1278, Brussels, 22 September 2003
6 SRSA/Rof/Björn Albinson, Alternate Ways To Achieve Fire Safety, Swedish Rescue Services Agency, August 2002, pp. 1; S. Kerber, Analysis of Changing Residential Fire Dynamics and its Implications on Firefighter Operational Timeframes, UL, 2011, pp. 2


Popular posts from this blog

The Beginners Guide To Pipe Insulation: Getting to grip with the basics

Our Beginners Guide series of blogs will look at the common areas of pipe insulation lagging that you will want to look at when choosing your product. This guide will be of most interest to the DIY installers, but some of our later guides will cover more complex products and areas of application.

One of the things we get asked about a lot is what the dimensions quoted for pipe insulation actually mean. You will always see three measurements quoted when describing pipe insulation; Wall Thickness, Bore Size and Length.

In the below diagram, A is the "Bore" and B is the "Wall".

Wall thickness is very simply how much insulation you have; so for example if you have 13mm Wall pipe insulation, then that means you have 13mm of insulation on either side of your pipe. This thickness is very often one of the most important part of your decision; too thin and you might not get the results you are looking for but too thick and it might not fit between your pipe and the wall.


The Beginners Guide to Pipe Insulation: Flexible Foams

Next up in the series we are doing on pipe insulation is "flexible foams"; a category that includes polyethylene and expanded nitrile rubber.

Polyethylene Pipe Insulation
Climaflex pipe insulation is the UK's leading brand for polyethylene pipe insulation. This is the grey foam that most people are familiar with, the kind you would traditionally find in garden centres for example. Polyethylene is the cheapest, widely available product in the market. People very often wrongly assume cheap means poor quality, this is not the case with a brand such as Climaflex. It has a thermal conductivity of 0.034 W/m.K at 0°C which is broadly equal to that of any other flexible foam, and it also has a much higher "μ factor" than other foams, making it more resistant to moisture ingress. These facotrs make it ideal for use around the home, being easy to work with and providing good insulation. 
The material can be purchased in 1m and 2m lengths, and is available in wall thicknesse…

Frost protection for domestic pipes

With the cold weather approaching we thought it would be a good idea to touch on how best to protect your pipes from frost this winter.

When dealing with frost protection on pipes inside a building your aim with insulating them is to delay the onset of freezing for as long as possible; it is not possible to guarantee a pipe will not freeze by insulation alone. The better the insulation, and the thicker the insulation, the longer you will give yourself. Under normal circumstances you aim to give yourself about 8-10 hours protection against sub zero temperatures. With pipes inside a home this is usually long enough to be sure the pipes will not freeze.

Ice formation inside the pipes will lead to an increase in pressure. As the water tries to flow this pressure will increase, and eventually will lead to the pipes bursting. A burst pipe can cause a lot of problems, not least of which is a lot of damage to your property and a lot of expense incurred.

Water regulations state that all water …