K Flex used in all 12 Stadiums at the 2018 World Cup in Russia

Following on from the supply of materials used in stadiums during the 2014 World Cup held in Brazil, since the first half of 2012 K-FLEX Russia has been supplying technical heat insulation for a number of large Russian stadiums to feature in the 2018 World Cup: Moscow, Saint-Petersburg, Saransk, Kazan, Ekaterinburg & Sochi to name a few; in total more than 11,000m3 of material was used!

K-FLEX products were installed for heating pipes, water supply, air conditioning, ventilation systems, and acoustic insulation.

Stadium “Opening Arena" in Moscow with a capacity of 45,000 people - in the 1-2 quarter of 2014 the materials K-FLEX ST were installed for heat pipes, water supply and air conditioning. Total supply volume was more than 300 m3 of technical heat insulation K-FLEX.

Stadium “Luzhniki” will host the 2018 World Cup's opening game between hosts Russia & Saudi Arabia

Stadium “Luzhniki” (which will host the tournament's opening game between hosts Russia & Saudi Arabia) in Moscow with a capacity of 81,000 people - in the 1-2 quarter of 2015 the materials K-FLEX ST and K-FLEX AIR were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 450 m3 of technical heat insulation K-FLEX.

Stadium “Nizhny Novgorod” in Nizhny Novgorod with a capacity of 44,900 people - in the 2-3 quarter of 2017 the materials K-FLEX ST and K-FLEX AIR were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 1500 m3 of technical heat insulation K-FLEX.

Stadium “Volgograd Arena” (which will host England’s opening game against Tunisia) in Volgograd
with a capacity of 45,000 people - in the 3-4 quarter of 2017 the materials K-FLEX ST, K-FLEX AIR were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 800 m3 of technical heat insulation K-FLEX.

Stadium “Mordovia Arena” in Saransk with a capacity of 45,000 people - in the 3-4 quarter of 2017 the materials K-FLEX ST and K-FLEX AIR were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 800 m3 of technical heat insulation K-FLEX.

Stadium “Kazan Arena” in Kazan with a capacity of 45,000 people - in the 3-4 quarter of 2012 the materials K-FLEX ST, K-FLEX AIR, K-FLEX AL CLAD were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 1300 m3 of technical heat insulation K-FLEX.

Stadium “Saint-Petersburg” in (unsurprisingly) Saint-Petersburg with a capacity of 67,800 people - in the 1-2 quarter of 2017 the materials K-FLEX ST, K-FLEX AIR, K-FLEX AL CLAD, K-FLEX Supports were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 2000 m3 of technical heat insulation K-FLEX.

Stadium “Ekaterinburg Arena” in Ekaterinburg with a capacity of 35,000 people - in the 3-4 quarter of 2017 the materials K-FLEX ST, K-FLEX AL CLAD were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 800 m3 of technical heat insulation K-FLEX.

Stadium “Fisht” in Sochi (which hosted the 2014 winter Olympics) with a capacity of 44,000 people - in the 1-2 quarter of 2012 the materials K-FLEX ST/SK, K-FLEX AIR were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 1500 m3 of technical heat insulation K-FLEX.

Stadium “Rostov Arena” in Rostov-on-Don with a capacity of 43,700 people - in the 2-3 quarter of 2017 the materials K-FLEX ST were installed for heat pipes, water supply, air conditioning. Total supply volume was more than 500 m3 of K Flex Insualtion.

Stadium “Kaliningrad” in Kaliningrad with a capacity of 35,000 people - in the 3-4 quarter of 2017 the materials K-FLEX ST were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 600 m3 of technical heat insulation K-FLEX.

Stadium “Samara Arena” in Samara with a capacity of 44,900 people - in the 3-4 quarter of 2017 the materials K-FLEX ST, K-FLEX AIR, K-FLEX AL CLAD, K-FONIK ST GK were installed for heat pipes, water supply, air conditioning and ventilation system. Total supply volume was more than 1000 m3 of technical heat and acoustic insulation K-FLEX.

The Beginners Guide To Pipe Insulation: Getting to grip with the basics

Our Beginners Guide series of blogs will look at the common areas of pipe insulation lagging that you will want to look at when choosing your product. This guide will be of most interest to the DIY installers, but some of our later guides will cover more complex products and areas of application. One of the things we get asked about a lot is what the dimensions quoted for pipe insulation actually mean. You will always see three measurements quoted when describing pipe insulation; Wall Thickness, Bore Size and Length. In the below diagram, A is the "Bore" and B is the "Wall". Wall thickness is very simply how much insulation you have; so for example if you have 13mm Wall pipe insulation, then that means you have 13mm of insulation on either side of your pipe. This thickness is very often one of the most important part of your decision; too thin and you might not get the results you are looking for but too thick and it might not fit between your pipe and the w

The Beginners Guide to Pipe Insulation: Flexible Foams

Next up in the series we are doing on pipe insulation is "flexible foams"; a category that includes polyethylene and expanded nitrile rubber. Polyethylene Pipe Insulation Climaflex pipe insulation is the UK's leading brand for polyethylene pipe insulation. This is the grey foam that most people are familiar with, the kind you would traditionally find in garden centres for example. Polyethylene is the cheapest, widely available product in the market. People very often wrongly assume cheap means poor quality, this is not the case with a brand such as Climaflex. It has a thermal conductivity of 0.034 W/m.K at 0 °C which is broadly equal to that of any other flexible foam, and it also has a much higher " μ factor" than other foams, making it more resistant to moisture ingress. These facotrs make it ideal for use around the home, being easy to work with and providing good insulation. The material can be purchased in 1m and 2m lengths, and is availabl

Frost protection for domestic pipes

With the cold weather approaching we thought it would be a good idea to touch on how best to protect your pipes from frost this winter. When dealing with frost protection on pipes inside a building your aim with insulating them is to delay the onset of freezing for as long as possible; it is not possible to guarantee a pipe will not freeze by insulation alone. The better the insulation, and the thicker the insulation, the longer you will give yourself. Under normal circumstances you aim to give yourself about 8-10 hours protection against sub zero temperatures. With pipes inside a home this is usually long enough to be sure the pipes will not freeze. Ice formation inside the pipes will lead to an increase in pressure. As the water tries to flow this pressure will increase, and eventually will lead to the pipes bursting. A burst pipe can cause a lot of problems, not least of which is a lot of damage to your property and a lot of expense incurred. Water regulations state that al

Gilsulate International, Inc.17 December 2018 at 03:12
I read your post Great post and great information thanks for sharing
https://gilsulate.com/
bob15 May 2020 at 05:14
Thanks for this amazing article on K Flex used in all 12 Stadiums at the 2018 World Cup in Russia was Just searching for Roofing Services - Affording Your Home's Full Functionality and Comfort

and found this amazing website of yours.

Pipe Insulation Blog

Search This Blog